jinnianhui金年会·金字招牌|信誉至上

The oxygen globe valve is a forced sealed valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface not to leak.When the medium from the lower valve disc into valve 6, the operating force to overcome the resistance, is the friction force of the valve stem and packing and the thrust generated by the pressure of the medium, the force of the valve is larger than the force of the valve open, so the diameter of the valve stem to be large, otherwise the valve stem bending fault will occur.In recent years, from the appearance of a sealed valve, the flow of the medium of the flange globe valve will be changed from the upper disc into the valve chamber, then under the action of the medium pressure, the force to close the valve is small, and the force to open the valve is large, the diameter of the valve stem can be reduced accordingly.At the same time, under the action of the medium, this form of the valve is more rigorous.

Product Model: YJ41W
Nominal diameter: DN15~400mm
Nominal pressure: PN1.6~4.0MPa
Applicable temperature: room temperature
Applicable medium: oxygen
Design and Manufacture: GB12235-89
Structure length: GB12221-89
Flange size: B/G79-94
Inspection and test: GB13927